Ball Valve

DIN Ball Valve Pressure: PN16 Size: DN15-20mm Temperature: -29-150℃ Connect Type: Flange Material: Cast steel, Stainless steel Seat Material: PTFE, PPL Media: water, gas, oil Function: Shutoff Operati

ANSI BALL VALVE class150 ball valve, 8 inch ball valve, stainless steel ball valve, stainless steel 8 inch ball valve Pressure: Class150-600 Size: 1/2”-12” Temperature: -29- 150℃ Connect Type: Flange

It is welded by forged steel. The forging materials are subjected to ultrasonic examination according to ASME nondestructive flaw detection requirements. The welding slope on the connection face is subjected to liquid penetration examination.

The trunnion ball valve is used to cut off or connect the media in various of Class150~Class2500. The valves made of different materials are suitable for various media such as water, steam, oil, liquefied gas, natural gas, coal gas, nitric acid, oxidizer, urea and etc. The driving modes include manual operation and electric operation. The connection ends can be flange or butt welding.

ANSI BALL VALVE class150 ball valve, 8 inch ball valve, stainless steel ball valve, stainless steel 8 inch ball valve Pressure: Class150-600 Size: 1/2”-12” Temperature: -29- 150℃ Connect Type: Flange

Technical Specification Nominal diameter: NPS 2～NPS 56 Operating temperature: -46℃～121℃ Operating pressure: CLASS 150～CLASS 2500 Material: WCB、A105、LCB、LF2、CF8、F304、CF8M、F316, etc. Design standard: AP

It is welded by forged steel. The forging materials are subjected to ultrasonic examination according to ASME nondestructive flaw detection requirements. The welding slope on the connection face is subjected to liquid penetration examination.

ANSI BALL VALVE class150 ball valve, 8 inch ball valve, stainless steel ball valve, stainless steel 8 inch ball valve Pressure: Class150-600 Size: 1/2”-12” Temperature: -29- 150℃ Connect Type: Flange

Technical Specification Nominal diameter: NPS 2～NPS 56 Operating temperature: -46℃～121℃ Operating pressure: CLASS 150～CLASS 2500 Material: WCB、A105、LCB、LF2、CF8、F304、CF8M、F316, etc. Design standard: AP

The ball valve with clamp connection has the characteristics of natural anti-static structure, anti-misoperation structure and reliable sealing of valve stem. The valve body adopts an integral structure. Through precise processing and assembly, the ball core is loaded from one end, and the compression ring is tightened to keep good contact and sealing between the two soft sealing seats and the ball core. The valve pressure ring inner gasket is also well sealed so that the leakage of the valve is zero. Because of the integral structure of the valve body, so the valve to achieve ultra-short flange distance, the weight of the machine greatly reduced, only about 50% of the same kind of ordinary ball valve.

ANSI BALL VALVE class150 ball valve, 8 inch ball valve, stainless steel ball valve, stainless steel 8 inch ball valve Pressure: Class150-600 Size: 1/2”-12” Temperature: -29- 150℃ Connect Type: Flange

The three - way ball valve can be divided into L type and T type. The L type three way ball valve is used to switch the medium flow direction, so that the two vertical channels can be connected. The three way ball valve usually adopts the two seat structure, and it can also adopt four seat structure according to the user's request. The four valve seat sealing three ball valve has beautiful shape and compact structure. It can not only switch the flow direction of the medium, but also make the three channels interconnected. At the same time, it can close any channel, make the other two channels connected, and flexibly control the flow or shunt of the medium in the pipeline.