Gost Gate Valve

Standards compliance

Design Standard: GOST 5762-2002

Face to Face Dimension: GOST 3706-93

End Flange Dimension: GOST 12815-80

End BW Dimension: GB/T 12224

Structures: Straight Pattern

Material of Body: GS-C25, S.S 304, S.S 316

Pressure Rating: PN16, PN25, PN40, PN63,PN160

Test standard: GOST356-80

Technical Specification

Connection to pipe flanges, clutch, welding. Optionally flange may be any according to GOST 12815-80. By default, run on the flange PN 16 - version 1, PN 25, 40 - version 2 (by special order PN 25 - Version 3), PN 63, 100, 160 - Version 7 to GOST 12815-80 series 2.

Construction in accordance with GOST 3706-83 length.

Tightness of the gate according to GOST 9544-2005.

Management of manual valves (handwheel).

Operating position of valves in a horizontal pipe or flywheel drive up (a deviation of 45 ? in either direction) on the vertical - any.

Direction of the medium in the valve - on either side of the main aisles.

Catches of steel grades can be made four versions

- Steel 20 or 20Л;

- Steel 09Г2С or 20ГЛ;

- Steel or 12Х18Н10T 12Х18Н9TЛ;

- Steel or 10Х17Н13M2T 12Х18Н12M3TЛ.

The required performance of selected operating conditions, aggressive working medium temperature.

Missing data in the catalog are available upon request of the consumer.