Forged Gate Valve

Forged Steel SW Gate Valve

Forged steel Gate Valves are primarily used for stop valves fully opened or fully closed .They are not normally considered for throttling purposes,but more for slurries,viscous fluids,etc. Gate valves are characterized by a traveling wedge ,which is moved with the operation of the stem nut. Gate valves usually have a minimum pressure drop when fully open,provide tight shut-off when fully closed,and remain relatively free of contamination buildup.

Forged Stainless Steel Gate Valve 800LB

Forged steel Gate Valves are primarily used for stop valves fully opened or fully closed .They are not normally considered for throttling purposes,but more for slurries,viscous fluids,etc. Gate valves are characterized by a traveling wedge ,which is moved with the operation of the stem nut. Gate valves usually have a minimum pressure drop when fully open,provide tight shut-off when fully closed,and remain relatively free of contamination buildup.

Forged Pressure Seal Gate Valve

The opening and closing parts of forged steel gate valves are gate plates. The movement direction of the gate is perpendicular to the direction of the fluid, and the forging gate valve can only be fully opened and closed, and can not be adjusted and throttled. The gate of the forging gate valve has two sealing surfaces. The two sealing surfaces of the most commonly used gate valves are wedge-shaped and wedge angles vary with valve parameters.

Flanged End Pressure Seal Gate Valve

Technical Specification Normal Size Range: 1/2"- 4" Normal Pressure Rating: PN10~PN420, CLASS150~2500 Material: A105,LF2,F11,F22,F304,F304L,F316,F316L Temperature Range: -29~425Degree C Standards comp

Forged Bellow Sealed Gate Valve

The opening and closing parts of Forged Steel Bellows Gate Valves are plug valves, the sealing faces are flat or conical, and the disc moves along the centerline of the fluid in a straight line. The motion form of the stem has the lifting rod type (the stem lift, the handwheel not lifting), also the lifting and rotating rod type (the handwheel and the stem rotates with the lift, the nut is located on the body). The corrugated valve is only suitable for full opening and full closing, and no adjustment and throttling are allowed. Valves of this type should be installed horizontally in pipes.